![]() ![]() You must manually upgrade the FPD image running on Upgrade, so you must reload the line card manually to use the new FPD image ![]() Reloaded line cards do not reload automatically after a FPD image automatic SIPs and SPAs support manual upgrades for FPGA devices using the Cisco FPD upgrade feature that is further described in Image package that corresponds to a Cisco IOS XR software image. FPGA and ROMMON software upgrades are part of an FPD The NCS 5500 supports upgrades for FPGA devices on its SIPs and SPAs. ‘Yes’ in the Upg/Dng? (upgrade/downgrade) column indicates that an upgrade or SPAs in the SIP until the incompatibility is addressed.įpd command to determine if an FPD upgrade is required. Interfaces an FPD incompatibility on a SIP disables all interfaces for all Incompatibility on a SPA does not necessarily affect the running of the SPA You must manually upgrade the FPD image runningĬisco IOS XR software that is running on the router if an incompatibility exists betweenĬisco IOS XR software, the device with the FPGA may not operate properly until the Image is released that supports SIPs and SPAs, a companion SIP and SPA FPD Troubleshooting Problems with FPD Image UpgradesĪn FPD image is used to upgrade the software on an FPD.Configuration Examples for FPD Image Upgrade. ![]() This module contains the following topics: To locate documentation for other commands that might appear in the course of performing a configuration task, search onlineĪggregation Services Router Commands Master List.įor parallel FPD upgrade for power modules. Upgrade for SPA or SIP FPD images when incompatibilities arise.įor complete descriptions of the FPD commands listed in this module, refer to the upcoming sections. Information that you must know to verify image versions and to perform an ![]() Programmable memory device that exists on most hardware components of theīeen introduced to collectively and generically describe any type ofĬisco IOS XR software provides the Cisco FPD upgrade feature to manage the upgrade of Aįield-programmable gate array (FPGA) is a type of Implemented on router cards that support separate software upgrades. Field-programmable devices (FPDs) are hardware devices ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |